Conventional Fire Alarm Centers, 24V DC power supply
It is a conventional system fire alarm control system which provides economical solutions for small, medium, large scale applications and has a modern exterior appearance and surface mount production technique.
* Designed for small and medium sized areas.
* 24V DC works with external power supplies at 1.5A power.
* 2,4,8,16,32,64 region growth capacity.
* 32 standard fire detectors can be connected to 1 fire zone.
2100 Optical Smoke Detector
Optical smoke detectors have a photoelectric smoke cell that works with IR light scattering principle. The photoelectric smoke cell is protected by a thin wire cage to prevent exposure to external influences such as large particle dust, flies and insects. Optical smoke detectors have CE marking according to EN 54-7 and 89/336 / EEC EMC directive.
2200 Ionized Smoke Detector
Lonized smoke detectors, humidity, ambient temperature etc. has a dual chambered ionization cell so that it is not affected by changes. The first chamber in the ionization cell works with the reference, second chamber sampling principle. The ionization cell is protected by a thin wire cage to prevent exposure to external influences such as large particle dust, flies and insects. Ionized smoke detectors are CE marked according to EN 54-7 certificate and 89/336 / EEC EMC directive.
2300 Combined Temperature Detector
The combined temperature detector detects the temperature by means of two thermally sensitive semiconductors. Bimetal element is not used as a sensor. The combined temperature detector can operate as a constant temperature detector and temperature rise rate detector. It works by a sudden increase in ambient temperature of 30 ° C in 60 seconds or an alarm at 60 ° C ambient temperature. The combined temperature detector cage is designed to respond quickly to ambient temperature. Combined temperature detectors have CE mark according to EN 54-5 certificate and 89/336 / EEC EMC directive.
3500 Universal Detector Socket
It is compatible with conventional and analogue addressable system detectors. For MG series detectors, parallel warning lamp output is standard. MG-3500 sockets have Ni-Cd coating contacts against corrosion and should be clipped to prevent contact. SSPB (Russia) certified and approved by the General Directorate of Civil Defense in Kazakhstan, Oman, Bahrain and United Arab Emirates.
the conventional gas alarm system has added a new product to my product range. The GDR-24C series Carbon Monoxide Gas Detectors operate with an external supply voltage of 24V DC and provide electrochemical sensor with stable sensitivity and superior operating performance. 2 Alarm Level Output product is manufactured with surface mount production technology and microprocessor controlled. You can use the following link for detailed information about our user friendly gas detector with wide application environment.
5100 Conventional System Fire Alarm Button
Conventional fire alarm buttons are activated by breaking the plastic film on the plastic film. When the glass breaks, a micro switch, which is normally based on the CAM, is released and changes its position and remains in this state until a new glass is installed. Since the glass is covered with a plastic layer, it does not damage the handle when broken. Certified to EN 54-11 and SSPB (Russia) and approved by the General Directorate of Civil Defense in Kazakhstan, Oman, Bahrain and the United Arab Emirates.
5200 Flasher Siren
The MG-5200 flasher siren can be seen and has audible alarm features. It should be mounted so that it can be heard with 75 dB sound intensity from the deepest point of the building. It must be installed at a height of 2m so that it can be seen. The maximum volume is 105 dB (A) @ 24V DC at 1m. Flashing sirens have 3W, 150 / min flash. SSPB (Russia) certified and approved by the General Directorate of Civil Defense in Kazakhstan, Oman, Bahrain and United Arab Emirates.
Beam Type Beam Smoke Detector
Beam type detection
Prevent false alarms for dust accumulation, natural phenomena, etc.
Detection between 10-100m
Saw for the places with high ceilings 6m
Suitable for factory, warehouse, hangar,
The protection area is 1500 m2 (15x100 m)
Algorithmic 8 bit processor for error reporting
Conventional UV flame detector
8 bit microprocessor
It can detect 3cm size flame from 10m distance by standard calibration
Pre-recorded fire verification program detects 1000 fire types
Specially designed reservoir prevents water accumulation